Picture

RG-RSR77-XA-08 10 RU Multiservice Core Modular Router

Mainly used as the core or aggregation node on a WAN of the government, finance, carrier, education, or large- and medium-sized enterprise network.

Modelos

RG-RSR77-XA-03

3 x line card slots. 12 x subcard slots

RG-RSR77-XA-08

8 x line card slots. 32 x subcard slots

Serie

RG-RSR77-XA Series

Datasheet Sales Enquiry

Características destacadas

A modular design with various expansion card interfaces, supporting rates ranging from 2 Mbps to 100 Gbps
Support for Segment Routing over IPv6 (SRv6), simplifying protocol configuration and facilitating quick service rollout
Redundancy for critical components, ensuring uninterrupted services and improving overall reliability
Y-shaped airflow design, improving cooling efficiency and lowering energy consumption

Features
Especificaciones
Resources
Información del pedido
FAQ

Sales Enquiry

Features

Multiservice Core Router RG-RSR77-XA-08

The router supports eight line card slots and 32 subcards and offers high-density GE, 10GE, and 100GE ports. This series is designed to fit into cabinets with a depth of 600 mm (23.62 in.), saving approximately 30% of space compared to similar products in the industry.

Appearance

Dimensions

A Modular Design with Various Subcard Ports, Supporting Rates Ranging from 2 Mbps to 100 Gbps

Line cards include main cards and subcards. The subcards support multiple types of ports, including E1, POS, GE, 10GE, and 100GE ports. You can install subcards as needed to meet different networking requirements.

Support for SRv6, Simplifying Protocol Configuration and Facilitating Quick Service Rollout

Segment Routing over IPv6 (SRv6) is a next-generation IP transport protocol based on IPv6. SRv6 simplifies and consolidates traditional complex network protocols, lowering the O&M threshold. SRv6 devices can be deployed alongside IPv6 devices so that existing networks can achieve better compatibility and support quick rollout of a large number of services.

MPLS

SRv6

Redundancy for Critical Hardware Components, Ensuring Uninterrupted Services and Improving Overall Reliability

A redundant design is adopted for key components, such as the supervisor engine, switch fabric module, and power supply module. All modules support hot swapping, reducing the risk of device failures and service interruptions, and significantly enhancing system reliability.

1:1 Routing Engine Redundancy

If the active routing engine fails, data is switched to the standby routing engine within seconds.

3+1 Switching Fabric Module Redundancy

The router supports redundant and hot-swappable switch fabric modules, ensuring zero packet loss during failover scenarios.

N+M Power Supply Module Redundancy

The router supports AC/DC power supply redundancy and hot swapping, ensuring uninterrupted power supply.

Y-shaped Airflow Design, Improving Cooling Efficiency and Lowering Energy Consumption

The side-to-rear Y-shaped airflow design creates a three-dimensional heat dissipation channel, increasing the airflow by 30% and enhancing the overall efficiency of heat dissipation. Independent airflows of line cards and switch fabric modules,
improving the heat dissipation efficiency and achieving a minimum power consumption of 0.5 W per gigabyte of data transmission.

Especificaciones

Hardware Specifications

Hardware Specifications	RG-RSR77-XA-03	RG-RSR77-XA-08
Port Specifications
Module management port	RSR77-XA-03-CM: ● 1 x RJ45 console port ● 1 x 10/100/1000BASE-T RJ45 MGMT port	RSR77-XA-08-CM: ● 1 x RJ45 console port ● 1 x 10/100/1000BASE-T RJ45 MGMT port RSR77-XA-08-DSF & RSR77-XA-08-DSF II: ● 1 x RJ45 console port
Module slot	2 x supervisor module slots 3 x modular line card slots（A maximum of 12 modular port adapters are supported.） 4 x power module slots 1 x fan module slot	2 x supervisor module slots 8 x modular line card slots（A maximum of 32 modular port adapters are supported.） 4 x switch fabric module slots 4 x power module slots 2 x fan module slots
Module hot swapping	Supported	Supported
Supervisor module redundancy	1+1 redundancy	1+1 redundancy
Switch fabric module	2 x integrated switch fabric modules	4 x independent switch fabric modules
System Specifications
Switching capacity	1.2 Tbps	3.2 Tbps
Packet forwarding rate	RSR-77-XA-SIP3: 72 Mpps RSR-77-XA-SIP6: 891 Mpps	RSR-77-XA-SIP3: 192 Mpps RSR-77-XA-SIP6: 2,376 Mpps
ARP table size	40,000 (Modular port adapter)	40,000 (Modular port adapter)
Number of IPv4 unicast routes	2.6 M	2.6 M
Number of IPv4 multicast routes	2,048	2,048
Number of IPv6 unicast routes	1 M	1 M
Number of IPv6 multicast routes	1,024	1,024
Number of ACEs	32,000	32,000
Dimensions and Weight
Unit dimensions (W x D x H)	442 mm×500 mm×219.5 mm (17.40 in. x 19.69 in. x 8.64 in) The depth of the chassis with the cable management bracket is 555 mm (21.85 in.)	442 mm x 606.7 mm x 442.5 mm (17.40 in. x 23.89 in. x 17.42 in.) The depth of the device with the cable management bracket is 670.1 mm (26.38 in.).
Rack height	5 RU	10 RU
Unit weight	12.5 kg (27.56 lbs)	43.55 kg (96.01 lbs)
Power Supply and Consumption
Power supply	4 x power modules（N+M redundancy）	4 x power modules（N+M redundancy）
Power input	RG-PA460-RI (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V to 290 V AC, 45 Hz to 65 Hz ● Maximum input current: 6 A	RG-PA1600I (AC Input)： ● Rated input voltage: 100 V to 240 V AC, 50Hz~60Hz ● Max. input voltage: 90 V to 290V AC, 47Hz to 63Hz ● Max. input current: 16 A RG-PD600I (DC Input)： ● Rated input voltage: -48 V to -60 V DC ● Max. input voltage: -38 V to -75 V DC ● Max. input current: 20 A
Power output	RG-PA460-RI (AC input): ● Output voltage: 12 V ● Maximum output current: 36 A	RG-PA1600I： ● 90V to 176V AC Input： ○ Output Voltage: 12 V DC ○ Maximum output current: 100 A ● 176V to 290V AC Input: ○ Output Voltage: 12 V DC ○ Maximum output current: 133.4 A RG-PD600I： ● DC Input： ○ Output voltage: 12 V DC ○ Maximum output current: 50 A
Maximum output power	RG-PA460-RI： ● 90 V AC to 290 V AC：460W	RG-PA1600I: 90 V AC to 176 V AC, 1200 W 176 V to 290 V AC, 1600 W RG-PD600I: 600 W
Module power consumption	Supervisor module: ● RSR77-XA-03-CM: ＜ 50 W Line card: ● RSR77-XA-SIP3 (modular line card): ＜ 180 W ○ NM-4XS-KB: ＜ 14 W ○ NM-2XS-KA: ＜ 11 W ○ NM-8GT-G: ＜ 7 W ○ NM-8SFP-G: ＜ 16 W ○ DNM-1CQ-KC: ＜ 21 W ○ NM-8E1/CE1: ＜ 5 W ● RSR77-XA-SIP6 (modular line card): ＜ 280 W ○ DNMX-20XS: ＜ 35 W ○ DNMX-20SFP: ＜ 35 W ○ DNMX-24GT: ＜ 24 W ○ DNMX-4CQ: ＜ 35 W Fan module: ● FAN: ＜ 216 W	Supervisor module: ● RSR77-XA-08-CM: < 70 W Switch fabric module: ● RSR77-XA-08-DSF: ＜ 87 W ● RSR77-XA-08-DSF II: ＜ 160 W Line card: ● RSR77-XA-SIP3 (modular line card): ＜ 180 W ○ NM-4XS-KB: ＜ 14 W ○ NM-2XS-KA: ＜ 11 W ○ NM-8GT-G: ＜ 7 W ○ NM-8SFP-G: ＜ 16 W ○ DNM-1CQ-KC: ＜ 21 W ○ NM-8E1/CE1: ＜ 5 W ● RSR77-XA-SIP6 (modular line card): ＜ 280 W ○ DNMX-20XS: ＜ 35 W ○ DNMX-20SFP: ＜ 35 W ○ DNMX-24GT: ＜ 24 W ○ DNMX-4CQ: ＜ 35 W Fan module: ● FAN: ＜ 216 W
Environment and Reliability
Mean time between failure (MTBF)	216,000 hours (24 years)	342,000 hours (39 years)
Temperature	Operating temperature: 0ºC to 45ºC (32ºC to +113ºC) Storage temperature: –40ºC to 70ºC (–40ºF to +158ºF)
Humidity	Operating humidity: 10% RH to 90% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing)
Altitude	● Maximum operating altitude: 4,000 m (13123.36 ft.) ● Maximum storage altitude: 5,000 m (16404.20 ft.) ● Long-term operating altitude: 45ºC (113ºF) at an altitude of 1800 m (5905.51 ft.)
Acoustic noise	Noise in room temperature: ≤ 70 dB Maximum noise: < 77 dB	35°C (95°F): 60 dB 50°C (122°F): 75 dB

Software Specifications

Software Specifications	RG-RSR77-XA Series
Ethernet switching	Jumbo frame length: 1,578 bytes
	802.3az EEE
	LLDP/LLDP-MED
IP service	Static and dynamic ARP
	DHCP server, DHCP relay, and DHCP client
	FTP, TFTP, FTPv6, and TFTPv6
	NTP, SNTP, and NTPv6
	NAT
	Strict and loose RPF uRPF ignoring default routes
	ND
	FTP, TFTP, FTPv6, and TFTPv6
	DNS
	IPv4/IPv6 VRF
	DHCP server, DHCPv6 client, and DHCPv6 relay
	ND and ND snooping
	IPv6 GRE tunnel
IP routing	IPv4 and IPv6 static routing, and static blackhole routes
	RIP v1/v2 and RIPng
	OSPFv2 and OSPFv3
	IS-ISv4 and IS-ISv6
	BGP and BGP4+
	Routing policies
	BGP4, BGP4+, and MP-BGP
	IPv4 VRRP v2/v3 and IPv6 VRRP v3
	IPv4 and IPv6 PBR
Multicast	IGMP v1/v2/v3
	Static multicast routing
	PIM-DM, PIM-SM, PIM-SSM, PIM-SSMv6, PIM-SMv6, and other multicast routing protocols
	MSDP for inter-domain multicast
	MLDv1/v2
MPLS/SR	Basic MPLS functions
	MPLS forwarding
	6PE/6VPE interconnection with IPv4/IPv6 MPLS backbone network
	MPLS MIB (RFC 1273, 4265, 4382)
	L3VPN
	LSP
	LDP
ACL and QoS	Standard IP ACLs
	Extended IP ACLs
	Extended MAC ACLs
	IPv6 ACLs
	Applying ACLs to interfaces
	MPLS QoS
	HQoS
Security	Multiple AAA modes
	RADIUS authentication, authorization, and accounting
	TACACS+
	Attack defense
	Password security
	RNFP
	CPP
	FPM
	PKI
	IPsec VPN
	VPDN
	SSHv1 and SSHv2
	Global IP-MAC binding
	Login authentication and password security
Reliability	BFD
	GR
	DLDP
	ECMP
	NSR
	Hot swapping
NMS and maintenance	SPAN and ERSPAN
	SNMP v1/v2/v3
	System operation logging
	IPFIX
	Command line configuration through console, AUX Modem, Telnet, and SSH
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP
	gRPC

Note: The item marked with the asterisk (*) will be available in the future.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Información del pedido

Chassis and Supervisor Modules

Model	Description
RG-RSR77-XA-03	RG-RSR77-XA-03 chassis
RG-RSR77-XA-08	RG-RSR77-XA-08 chassis
RSR77-XA-03-CM	RG-RSR77-XA-03 routing switching module
RSR77-XA-08-CM	RG-RSR77-XA-08 routing module
RSR77-XA-08-DSF	RG-RSR77-XA-08 switch fabric module (40 Gbps supported by a single switch fabric module)
RSR77-XA-08-DSF II	RG-RSR77-XA-08 switch fabric module (200 Gbps supported by a single switch fabric module)

Power Modules

Model	Description
RG-PA1600I	RG-RSR77-XA-08, 1600 W AC power module
RG-PA460-RI	RG-RSR77-XA-03, 460 W AC power module
RG-PD600I	RG-RSR77-XA-08, 600 W DC power module

Modular Line Cards

Model	Description
RSR77-XA-SIP3	NM/DNM modular line card (Each modular line card supports up to four NM modular port adapters or two DNM modular port adapters)
RSR77-XA-SIP6	DNMX modular line card (Each modular line card supports up to two DNMX modular port adapters)

Modular Port Adapters

Model	Description
NM-2XS-KA	2-port 10GE Ethernet interface module, requiring additional SFP+ modules
NM-4XS-KB	4-port 10GE Ethernet interface module, requiring additional SFP+ modules
NM-8SFP-G	8-port 1GE Ethernet optical interface module, requiring additional SFP modules
NM-8GT-G	8-port 1GE Ethernet electrical interface module
DNM-1CQ-KC	1-port 100GE/40GE Ethernet interface module
DNMX-20XS	20-port 10GE Ethernet interface module, requiring additional SFP+ modules
DNMX-20SFP	20-port 1GE Ethernet optical interface module, requiring additional SFP modules
DNMX-24GT	24-port 1GE Ethernet electrical interface module
DNMX-4CQ	4-port 100GE/40GE Ethernet interface module, requiring additional SFP+ modules