Compare Products
Hide
VS
Modelos
Serie
Características destacadas
Dimensions and Weight |
RG-AP810-L |
Unit dimensions (W x D x H) |
220 mm x 220 mm x 49 mm (8.7 in x 8.7 in x 2.0 in) |
Shipping dimensions (W x D x H) |
507 mm x 319 mm x 278 mm (20.0 in x 12.6 in x 11.0 in) |
Unit weight |
Device: 0.6 kg (1.33 lbs) Mounting bracket: 0.07 kg (0.15 lbs) |
Shipping weight |
1.04 kg (2.29 lbs) |
Mounting |
Wall/Ceiling-mount (A mounting bracket is delivered with the main unit) |
Lock option |
Kensington lock and securing latch |
Wi-Fi Radio |
RG-AP810-L |
Radio design |
Dual-radio Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO |
Operating frequencies |
Radio 1, 802.11b/g/n/ax: ● 2.400 GHz to 2.4835 GHz, ISM Radio 2, 802.11a/n/ac/ax: ● 5.150 GHz to 5.250 GHz, U-NII-1 ● 5.250 GHz to 5.350 GHz, U-NII-2A ● 5.470 GHz to 5.725 GHz, U-NII-2C ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM Note: Country-specific restrictions apply. |
Data rates |
Combined peak data rate: 1.775 Gbps 2.4 GHz radio, 574 Mbps ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) 5 GHz radio, 1.2Gbps ● Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to 2SS HE80 802.11ax client devices (typical) |
Data rate set |
The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80) ● 802.11ax: 8.6 to 1,200 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80) |
Packet aggregation |
802.11n/ac/ax: A-MPDU and A-MSDU |
Antenna type |
Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas) |
Max. antenna gain |
2.8 dBi in 2.4 GHz and 3.6 dBi in 5 GHz The downtilt angle for the maximum gain is roughly 30 degrees. With reference to the pattern of each antenna of the MIMO radios, the maximum gain of the effective per-antenna pattern is 2.3 dBi in 2.4 GHz and 2.7 dBi in 5 GHz. |
Max. transmit power |
2.4 GHz radio: 26 dBm (23 dBm per chain) 5 GHz radio: 26 dBm (23 dBm per chain) Note: The transmit power is limited by local regulatory requirements. |
Power increment |
Configurable based on requirement |
Radio technologies |
802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) |
Modulation types |
802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Wi-Fi Radio Frequency Performance |
RG-AP810-L |
||
Frequency Band and Protocol |
Data Rate |
Max. Transmit Power per Transmit Chain |
Max. Receive Sensitivity per Receive Chain |
2.4 GHz, 802.11b |
1 Mbps |
23 dBm |
–91 dBm |
2 Mbps |
23 dBm |
–91 dBm |
|
5.5 Mbps |
23 dBm |
–90 dBm |
|
11 Mbps |
23 dBm |
–87 dBm |
|
2.4 GHz, 802.11g |
6 Mbps |
23 dBm |
–89 dBm |
24 Mbps |
22 dBm |
–82 dBm |
|
36 Mbps |
22 dBm |
–78 dBm |
|
54 Mbps |
20 dBm |
–72 dBm |
|
2.4 GHz, 802.11n (HT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS7 |
19 dBm |
–67 dBm |
|
2.4 GHz, 802.11n (HT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS7 |
19 dBm |
–64 dBm |
|
2.4 GHz, 802.11ax (HE20) |
MCS0 |
23 dBm |
–85 dBm |
MCS11 |
15 dBm |
–58 dBm |
|
2.4 GHz, 802.11ax (HE40) |
MCS0 |
23 dBm |
–82 dBm |
MCS11 |
15 dBm |
–54 dBm |
|
5 GHz, 802.11a |
6 Mbps |
23 dBm |
–89 dBm |
24 Mbps |
22 dBm |
–82 dBm |
|
36 Mbps |
22 dBm |
–78 dBm |
|
54 Mbps |
20 dBm |
–72 dBm |
|
5 GHz, 802.11n (HT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS7 |
19 dBm |
–67 dBm |
|
5 GHz, 802.11n (HT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS7 |
19 dBm |
–64 dBm |
|
5 GHz, 802.11ac (VHT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS9 |
18 dBm |
–60 dBm |
|
5 GHz, 802.11ac (VHT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS9 |
18 dBm |
–57 dBm |
|
5 GHz, 802.11ac (VHT80) |
MCS0 |
23 dBm |
–79 dBm |
MCS9 |
18 dBm |
–53 dBm |
|
5 GHz, 802.11ax (HE20) |
MCS0 |
23 dBm |
–85 dBm |
MCS11 |
16 dBm |
–58 dBm |
|
5 GHz, 802.11ax (HE40) |
MCS0 |
23 dBm |
–82 dBm |
MCS11 |
16 dBm |
–54 dBm |
|
5 GHz, 802.11ax (HE80) |
MCS0 |
23 dBm |
–79 dBm |
MCS11 |
16 dBm |
–52 dBm |
Bluetooth Radio |
RG-AP810-L |
Bluetooth |
Bluetooth 5.1 |
Antenna type |
1 x onboard built-in omnidirectional antenna |
Max. antenna gain |
2.4 dBi, with a downtilt angle of roughly 30 degrees |
Max. transmit power |
17 dBm (GFSK) 14 dBm (π/4-DQPSK, 8-DPSK) |
Receive sensitivity |
–95.5 dBm (DH5) –95 dBm (π/4-DQPSK) –87.5 dBm (8-DPSK) |
Ports |
RG-AP810-L |
Fixed service port |
Uplink: 1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation ● Compliance with IEEE 802.3af standard (PoE) ● Auto MDI/MDIX crossover ● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher) ● 802.3az EEE |
Fixed management Port |
1 x RJ45 console port (serial console port) |
Status LED |
1 x multi-color system status LED |
Button |
1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. |
Power Supply and Consumption |
RG-AP810-L |
Input power supply |
The AP supports the following two power supply modes: ● 48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately. ● PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++). Note: ● If both DC power and PoE are available, DC power is preferred. |
Power consumption |
Max power consumption: 12.95 W ● DC powered: 12.95 W ● PoE powered (802.3af): 12.95 W ● PoE+ powered (802.3at): 12.95 W ● PoE++ powered (802.3bt): 12.95 W ● Idle mode: 6 W |
Environment and Reliability |
RG-AP810-L |
Temperature |
Operating temperature: –10°C to +50°C (14°F to 122°F) Storage Temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F). |
Humidity |
Operating humidity: 5% to 95% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing) |
Environment standard |
Storage and shipment environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995 |
Mean Time Between Failure (MTBF) |
200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
Certifications and Regulatory Compliance |
RG-AP810-L |
Regulatory compliance |
EN 55032 EN 55035 EN 61000-3-3 EN IEC 61000-3-2 EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 300 328 EN 301 893 EN 300 440 FCC Part 15 EN IEC 62311 IEC 62368-1 EN 62368-1 |
*For more country-specific regulatory information and approvals, contact your local sale agency.
Applicable Software Version |
RG-AP810-L |
Applicable software version |
AP_RGOS 11.9(6)W1B4 or higher |
WLAN |
RG-AP810-L |
Max. number of BSSIDs |
32 (up to 16 BSSIDs per radio) |
STA management |
SSID hiding Band steering Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent client identification technology Intelligent load balancing based on the STA quantity or traffic |
STA limiting |
SSID-based STA limiting Radio-based STA limiting |
Bandwidth limiting |
STA/SSID/AP-based rate limiting |
Wireless roaming |
Layer 2 and Layer 3 roaming |
Security and Authentication |
RG-AP810-L |
Authentication and encryption |
Remote Authentication Dial-In User Service (RADIUS) PSK, PPSK, web, 802.1X, MSCHAPv2, PEAP, WPA, WPA2, and WPA3 authentication Data encryption: WEP (64/128-bit), WPA-TKIP, WPA-PSK, WPA2-AES, WPA3 |
Data frame filtering |
Allowlist, static blocklist, and dynamic blocklist |
WIDS |
WIDS (Wireless Intrusion Detection System) User isolation Rogue AP detection and containment |
ACL |
Dynamic ACL assignment ● ACL assignment based on time spans ● ACL assignment (complete entry) based on MAC addresses ● Execution of pre-configured ACLs (entry index) based on MAC addresses |
CPP |
Supported |
NFPP |
Supported |
Routing and Switching |
RG-AP810-L |
IP service |
Static IPv4 address and DHCP-assigned IPv4 address DHCP Snooping, Option 82, DHCP Server, DHCP Client |
Multicast |
Multicast-to-unicast conversion |
IPv6 basics |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping IPv6 DHCP Client |
IP routing |
IPv4/IPv6 static routing |
VPN |
PPPoE Client IPsec VPN, up to five IPsec tunnels |
Management |
RG-AP810-L |
Network management |
SNMP v1/v2c/v3 Syslog Debugging |
Network management platform |
Web-based management (Eweb) Ruijie Cloud |
User access management |
Console, SSH, and Telnet-based management FTP Client and TFTP Client |
Fat/Fit/Cloud mode switchover |
When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud. |
Model |
Description |
Remarks |
RG-AP810-L |
Wi-Fi 6 (802.11ax) dual-radio indoor wireless access point Up to four spatial streams Data rate of up to 1.775 Gbps 1 x 10/100/1000Base-T uplink port, supporting PoE and DC power supply Bundled with Ruijie Cloud Service lifetime license (The PoE injector is sold separately, which could be purchased from Ruijie. The DC power adapter should be purchased from a third-party vendor separately if needed.) |
Mandatory |
RG-E-120(GE) |
1-port PoE injector (1000BASE-T, IEEE 802.3af-compliant) |
Optional |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contáctenos
How can we help you?