Picture
RG-DEMUX/MUX Series 24-Port/48-Port Combiner/Transparent Distribution Device
Used in Simplified Optical Ethernet solution to make distribution nodes passive and provide exclusive Gigabit/10G bandwidth for Fiber-to-The-Room (FTTR)
Modelos
Serie
Características destacadas
- The 8-port 16-wavelength combiner innovatively adopts the colored optical technology and is used in combination with core or access switches equipped with pluggable colored optical transceivers.
- The dual-slot design provides 24 ports for device access per slot and a maximum of 48 ports for device access at full load. The device uses six WDM optical fibers for output.
- The passive network design supports direct replacement of distribution switches without requirement for O&M of ELV rooms.
- Exclusive Gigabit/10G fiber to the room is supported and the bandwidth can be upgraded easily. Transparent distribution devices can be retained during the upgrade.
- Multiple installation modes are available for selection.
RG-DEMUX/MUX Series 24-Port Combiner/Transparent Distribution Device
They are applied to enterprise-class all-optical network scenarios. The products innovatively combine the colored optical technology with passive devices using the Ethernet architecture to physically isolate channels of the device. They can be used together with Simplified Optical Ethernet solution 2.X to make distribution nodes passive completely and achieve 1G/10G bandwidth to the room.
Specifications
Installation Modes
The Ethernet architecture is transformed from three tiers to two tiers, and the building ELV rooms are truly passive and exempt from O&M management
The RG-DEMUX/MUX series combiner/transparent distribution device use the passive network design, replacing distribution switches. The devices from the core side to the access side are directly connected in a point-to-point manner. The controller displays the topology of the entire network, including port usage. This allows you to respond to link failures in a timely manner.
Solution Advantages
Topology Comparison
For example, an office building has 6 floors, with 2 ELV risers and 20 rooms on each floor, and 4 information points in each room.
Exclusive 1G/10G bandwidth to room, ease of link upgrade, no need to replace transparent distribution devices
Exclusive bandwidth
Ease of Bandwidth Expansion
1:1 bandwidth for FTTR, zero optical splitting, and no convergence. The access-side port rate is the same as the core-side port rate, implementing point-to-point transparent transmission.
FAQ
Tips: Product information and performance will be affected by upgrade iteration, specific
environment and
other factors, so FAQ content is for reference only. For further information, please contact
online support.
Documentos
Especificaciones
| Model |
RG-DEMUX-24LC/LC |
RG-DEMUX(C)-24LC/LC |
RG-DEMUX-48LC/LC |
RG-MUX-24LC/LC |
RG-MUX(C)-24LC/LC |
RG-MUX-48LC/LC |
| Name |
Expansion module for the 24-port core demultiplexer |
24-port demultiplexer, with chassis and one reserved expansion slot |
48-port demultiplexer |
Expansion module for the 24-port transparent multiplexer |
24-port transparent multiplexer, with chassis and one reserved expansion slot |
48-port transparent multiplexer |
| Number of CWDM 16-channel demultiplexer groups |
3 groups |
3 groups |
6 groups |
3 groups |
3 groups |
3 groups |
| Installation location |
Core side |
Core side |
Core side |
Building side |
Building side |
Building side |
| Maximum number of ports supported |
24 |
24 |
48 |
24 |
24 |
48 |
| Dimension (W × D × H) |
216.4 mm * 207 mm *33 mm |
297.6 mm * 438.5 mm * 40.2 mm |
297.6 mm * 438.5 mm * 40.2 mm |
216.4 mm * 207 mm * 33 mm |
210.2 mm * 440 mm * 39.8 mm |
210.2 mm * 440 mm * 39.8 mm |
| Model |
RG-DEMUX(C)-24LC/LC |
| Description |
24-port demultiplexer, with 3 demultiplexing ports (number of trunk fiber-optic cables can be connected) |
| Center wavelength |
1271 nm to 1571 nm (CWDM) |
| Channel spacing |
20 nm |
| Channel bandwidth |
±6.5 nm |
| Insertion loss |
≤ 4 dB (demultiplxer and transparent multiplexer) |
| Return loss |
> 45 dB |
| Polarization dependent loss |
< 0.3 dB |
| Adjacent channel isolation |
> 25 dB |
| Non-adjacent channel isolation |
> 35 dB |
| Connector |
LC/UPC |
| Operating temperature |
-40°C to 85°C (WDM products are not pressure sensitive and have no requirement for altitude) |
| Storage temperature |
-40°C to 85 °C |
| Operating humidity |
10% to 90% RH |
| Storage humidity |
5% to 90% RH |
| Standards |
GR-1221-Core and GR-1209-Core |
| Weight |
3.05 kg (net weight) |
| Model |
RG-MUX(C)-24LC/LC |
| Description |
24-port transparent multiplexer, with 3 demultiplexing ports (number of trunk fiber-optic cables can be connected) |
| Center wavelength |
1271 nm to 1571 nm (CWDM) |
| Channel spacing |
20 nm |
| Channel bandwidth |
±6.5 nm |
| Insertion loss |
≤4dB (demultiplexer and transparent multiplexer) |
| Return loss |
> 45 dB |
| Polarization dependent loss |
< 0.3 dB |
| Adjacent channel isolation |
> 25 dB |
| Non-adjacent channel isolation |
> 35 dB |
| Connector |
LC/UPC |
| Operating temperature |
-40°C to 85°C (WDM products are not pressure sensitive and have no requirement for altitude) |
| Storage temperature |
-40°C to 85 °C |
| Operating humidity |
10% to 90% RH |
| Storage humidity |
5% to 90% RH |
| Standards |
GR-1221-Core and GR-1209-Core |
| Weight |
2.57 kg (net weight) |
