Compare Products

Hide

Clear All

VS

RG-CS88-08 Switches - 1
RG-CS88-08 Switches - 2
RG-CS88-08 Switches - 3
RG-CS88-08 Switches - 4
RG-CS88-08 Switches - 5
RG-CS88-08 Switches - 6
RG-CS88-08 Switches - 7
RG-CS88-08 Switches - 8
RG-CS88-08 Switches - 9
RG-CS88-08 Switches - 10
RG-CS88-08 Switches - 1
RG-CS88-08 Switches - 2
RG-CS88-08 Switches - 3
RG-CS88-08 Switches - 4
RG-CS88-08 Switches - 5
RG-CS88-08 Switches - 6
RG-CS88-08 Switches - 7
RG-CS88-08 Switches - 8
RG-CS88-08 Switches - 9
RG-CS88-08 Switches - 10
Picture

RG-CS88-08 Ruijie 10 RU Modular High-Performance Core Switch with Cloud Management

Fit for data center, MAN, campus, and integrated data center and campus scenarios

Modelos
Serie
Características destacadas
  • 10 RU compact size, saving space
  • Up to 288 10GE ports on high-density 10GE cards
  • 40GE and 100GE ports, achieving high speed
  • Security defense policies, ensuring network robustness
  • Hardware-level multi-protection, delivering carrier-grade reliability
  • Cloud, Make Your Business Easy
Sales Enquiry
Key Specifications View More
Features

Cloud Managed Modular Core Switch RG-CS88-08

10 RU compact size, saving cabinet space,high-density 1G/10G/40G/100G line cards support up to 288 10GE ports. Only one line card is required to meet networking requirements at the small- or medium-sized network core or medium-sized network aggregation layer.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

CPU Protection Policy (CPP) controls the types and traffic of packets sent to the CPU, preventing CPU usage exceptions.

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

Dual-Boot Backup

Two flash chips for storing boot software achieve hardware-level boot
redundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Supervisor
Module Redundancy

1+1 hot standby ensures nonstop switch services.

1+1 Supervisor
Module Redundancy

1+1 hot standby ensures nonstop switch services.

N+M Power Supply Redundancy

Four hot-swappable power supplies realize failover within seconds and service continuity during power replacement, ensuring link reliability.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.

Cloud, Make Your Business Easy

Automatic device registration and configuration after device connection
Plug and play without commissioning, fast provisioning
Flexible replacement with no need of reconfiguration
Auto-sensing on ports, facilitating automatic O&M

Especificaciones

Hardware Specifications

Port Specifications

RG-CS88-08

Module slot

2 x supervisor module slots

6 x line card slots

4 x power module slots

2 x fan module slots

Supervisor module

CM88-CM

Switch fabric module

CM88-CM (switch fabric module integrated with supervisor module)

Line card

CM88-48GT-H

CM88-48SFP-H

CM88-48XS-H

CM88-8СQ-H

Power module

RG-PA600I-F

RG-PA1600I-F

Fan module

M08-FAN (pre-installed 2)

Module service port

CM88-48GT-H: 48 x 10/100/1000BASE-T ports

CM88-48SFP-H: 48 x 1GE SFP ports

CM88-48XS-H: 48 x 1GE/10GE SFP+ ports

CM88-8СQ-H: 8 x 40GE/100GE QSFP28 ports

Module management port

CM88-CM: 

● 1 x RJ45 console port

● 1 x RJ45 MGMT port

USB

CM88-CM: 2 x USB 2.0 ports

(No capacity limit. The 2G/4G/8G/16G/32G capacity is tested.)

 

System Specifications

RG-CS88-08

Switching capacity

9.6 Tbps

Packet forwarding rate

7200 Mpps

CPU

CM88-CM: quad-core processor, each core with the clock speed of 1.5 GHz

Line card: quad-core processor, each core with the clock speed of 1.5 GHz

BootROM

CM88-CM: 16 MB (2 flash chips for 1+1 boot redundancy)

Line card: 16MB (2 flash chips for 1+1 boot redundancy)

Flash memory

CM88-CM: 8 GB

Line card: 8 GB

Memory

CM88-CM: DDR4 4 GB

Line card: DDR4 2 GB

Switch buffer

Line card: 32 MB

MAC address table size

Number of global MAC addresses

● CM88-48GT-H, CM88-48SFP-H: 80,000

● CM88-8CQ-H, CM88-48XS-H: 96,000

Number of static MAC addresses

● CM88-48GT-H, CM88-48SFP-H: 4,000

● CM88-8CQ-H, CM88-48XS-H: 40,000

ARP table size

CM88-48GT-H, CM88-48SFP-H:

● underlay: 30,000

● overlay: 0

CM88-8CQ-H, CM88-48XS-H: 

● underlay: 50,000

● overlay: 0 (default and recommended)

Number of IPv4 unicast routes

CM88-48GT-H, CM88-48SFP-H: 12,000 (default and recommended, shared with IPv6 routes)

CM88-8CQ-H, CM88-48XS-H: 134,000 (default and recommended, shared with IPv6 routes)

Number of IPv4 multicast routes

CM88-48GT-H, CM88-48SFP-H: 8,000

CM88-8CQ-H, CM88-48XS-H: 16,000

Number of IPv6 unicast routes

CM88-48GT-H, CM88-48SFP-H: 6,000 (shared with IPv4 routes)

CM88-8CQ-H, CM88-48XS-H: 50,000 (shared with IPv4 routes)

Number of IPv6 multicast routes

CM88-48GT-H, CM88-48SFP-H: 4,000

CM88-8CQ-H, CM88-48XS-H: 8,000

Number of ACEs

Ingress

● CM88-48GT-H, CM88-48SFP-H: 5,000

● CM88-8CQ-H, CM88-48XS-H: 4,500

Egress

● CM88-48GT-H, CM88-48SFP-H: 1,000

● CM88-8CQ-H, CM88-48XS-H: 2,000

Number of VSU members

2

 

Dimensions and Weight

RG-CS88-08

Unit dimensions (W x D x H)

442 mm x 465mm x 441.7 mm (17.40 in. x 18.31 in. x 17.39 in.)

Shipping dimensions (W x D x H)

710 mm x 590 mm x 617 mm (27.95 in. x 23.23 in. x 24.29 in.)

Rack height

10 RU

Unit weight

35.6 kg (78.48 lbs) (empty chassis with 2 fan modules)

Shipping weight

50.20 kg (110.67 lbs) (empty chassis with 2 fan modules)

 

Power Supply and Consumption

RG-CS88-08

Power supply

4 x pluggable power modules

Power module redundancy

n+n power redundancy

(The type of the power supply should be identical.)

Power input

RG-PA600I-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz

● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 10 A

RG-PA1600I-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz

● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 16A

Maximum output power

RG-PA600I-F: 600 W

RG-PA1600I-F:

● 100 V AC to 176 V AC: 1200 W

● 176 V AC to 240 V AC: 1600 W

Module power consumption

Chassis RG-CS88-08 with 2 fan modules: < 176 W

Supervisor module CM88-CM: < 50 W

Line card:

● CM88-48GT-H: < 75 W

● CM88-48SFP-H: < 95 W

● CM88-48XS-H: < 160 W

● CM88-8CQ-H: < 130 W

 

Environment and Reliability

RG-CS88-08

Temperature

Operating temperature: 0°C to 50°C (32°F to 122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Humidity

Operating humidity: 10% to 90% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Altitude

Operating altitude: –500 m to +5,000 m (–1640.42 ft. to +16404.20 ft.)

Storage altitude: –500 m to +5,000 m (–1640.42 ft. to +16404.20 ft.)

Mean time between failure (MTBF)

216,000 hours (about 24 years)

Fan

2 x pluggable fan modules

Fan redundancy

1+1 redundancy

Heat dissipation

Supervisor module/line card: right-to-rear airflow

System power module: front-to-rear airflow

Acoustic noise

27°C (80.6°F): 70 dB

45°C (113°F): 77 dB

Module hot swapping

Supported: supervisor modules, line cards

Power module hot swapping

Supported

(Switch mode power supplies support hot-swapping power cords)

Fan module hot swapping

Supported

USB hot swapping

Supported

Cable hot swapping

All ports on line cards support hot-swapping cables.

Power supply monitoring

Monitoring of the power supply model, temperature, power, and voltage

Power supply failure alarming

Power-on control of line cards based on the supported power

Fan monitoring

Fan speed adjustment: 256 levels (Only automatic adjustment is supported.)

Fan failure alarming

Temperature monitoring

Temperature monitoring, over-temperature alarming

ESD

ESD contact discharge/air discharge: 6 kV/ 8kV

ESD immunity contact discharge/air discharge: 8 kV/15 kV

Surge protection

MGMT port : 4 kV

Service port: 4 kV

Power port: 6 kV

 

Certifications and Regulatory Compliance

RG-CS88-08

Safety regulation

IEC 62368-1

EMC regulation

EN 300386, EN 55032 Class A, EN 55035, 

EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, 

EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

 

Software Specifications

RG-CS88 Series

Feature

Description

Ethernet Switching

Jumbo frame (maximum length: 9216 bytes)

802.3az EEE

Maximum number of VLANs that can be created: 4,094

Super VLAN, Private VLAN

MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment

GVRP

Basic QinQ and selective QinQ

STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

ERPS (G.8032)

LLDP/LLDP-MED

MPLS

MPLS IPv6

MPLS L3VPN

MPLS 6VPE

MPLS MIB (RFC 1273, RFC 4265, and RFC 4382)

IP Service

Static and dynamic ARP

DHCP client

DHCP relay

DHCP server

DHCP snooping

DNS

DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping

GRE tunnel

Manual tunnel, automatic tunnel, and ISATAP tunnel for IPv6

Neighbor Discovery (ND) and ND snooping

IP Routing

Static routing

RIP and RIPng

OSPFv2 and OSPFv3

IPv4/IPv6 IS-IS

BGP4 and BGP4+

IPv4/IPv6 VRF

Policy-based routing (PBR)

GR

EVPN

Multicast

IGMP v1/v2/v3

IGMP proxy

IGMP snooping v1/v2/v3

IGMP fast leave

PIM-DM, PIM-SM, and PIM-SSM

PIM-SSM for IPv4 and IPv6

MSDP to achieve inter-domain multicast

MLDv1 and MLDv2

MLD v1/v2 snooping

Multicast static routing

Multicast source IP address check

Multicast source port check

PIM-SMv6

ACL and QoS

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL80 and IPv6 ACL

Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL redirection

Port traffic identification

Port traffic rate limiting

802.1p

Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences

Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ

Congestion avoidance: tail drop, RED, and WRED

CAR

Eight priority queues per port

Security

AAA

RADIUS authorization and accounting

TACACS+

Portal authentication, RADIUS, and TACACS+ login authentication

IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication

Web authentication

Hypertext Transfer Protocol Secure (HTTPS)

SSHv1 and SSHv2

Global IP-MAC binding

ICMP

Port security

IP source guard

DAI

SAVI

ARP spoofing prevention

CPU Protect Policy (CPP) and NFPP

Various attack defense functions, including NFPP and ARP anti-attack

uRPF

Login authentication and password security

Unknown multicast packets are not sent to the CPU, and unknown unicast packets can be suppressed.

Reliability

Rapid Ethernet Uplink Protection (REUP)

Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control

Data Link Detection Protocol (DLDP)

IPv4 VRRP v2/v3 and IPv6 VRRP

VRRP for the super-VLAN

BFD

1+1 redundancy for supervisor modules and fan modules, and N+M redundancy for power modules

Hot swapping of components

Hot patch and online installation of patches

GR for OSPF/IS-IS/BGP

BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing

Device virtualization

VSU

NMS and maintenance

SPAN, RSPAN, and ERSPAN

sFLOW

NTP

SNTP

FTP and TFTP

SNMP v1/v2/v3

RMON (1, 2, 3, 9)

NETCONF

CWMP

gRPC

Cloud and SON

Console/AUX Modem/Telnet/SSH2.0 CLI configuration

Fault alarm and auto-recovery

System operation logging

Show More
Resources All Resources
Learn about Products or Solutions
Software and Configuration
Información del pedido

Switch and Supervisor Module

Select the switch and supervisor module based on the specific product model.

Model

Description

RG-CS88-08

RG-CS88-08 switch, which can accommodate 6 service cards and 2 supervisor modules, and with 2 fans (Purchase at least one RG-PA600I-F/RG-PA1600I-F module.)

CM88-CM

CM88-CM new generation of high-performance supervisor module.

 

Power Modules and Fans

Select the power module based on power supply requirements. Note that at least one power module must be selected.

Model

Description

RG-PA600I-F

600 W AC power module, supporting redundancy

RG-PA1600I-F

1600 W AC power module, supporting redundancy

M08-FAN

CS88-08 fan: Each M08-FAN tray consists of two fan modules and one fan monitoring card. It blows air to the outside for convection. (This is a default configuration for the switches.)

 

Line Cards

Select the line card based on service requirements. Before ordering a line card, please contact the online customer service personnel for the details about the line card.

Model

Description

CM88-48GT-H

48 x10/100/1000BASE-T ports (RJ45)

CM88-48SFP-H

48 x 1GE SFP ports

CM88-48XS-H

48 x 1GE/10GE SFP+ ports

CM88-8CQ-H

8 x 40GE/100GE QSFP28 ports

Note:

  • 48 x 1GE/10GE SFP+ ports support 1GE SFP transceivers and 10GE SFP+ transceivers.

  • 8 x 40GE/100GE QSFP28 ports support 40GE QSFP+ transceivers and 100GE QSFP28 transceivers.


Optical Transceivers and Cables

1GE

Model

Description

MINI-GBIC-SX-MM850

1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF

MINI-GBIC-LX-SM1310

1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF

MINI-GBIC-LH40-SM1310

1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF

MINI-GBIC-ZX80-SM1550

1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF

GE-SFP-LX20-SM1310-BIDI

1000BASE-LX, SFP transceiver, Tx1310/Rx1550, BiDi LC, 20 km over SMF

GE-SFP-LX20-SM1550-BIDI

1000BASE-LX, SFP transceiver, Tx1550/Rx1310, BiDi LC, 20 km over SMF

GE-SFP-LH40-SM1310-BIDI

1000BASE-LH, SFP transceiver, Tx1310/Rx1550, BiDi LC, 40 km over SMF

GE-SFP-LH40-SM1550-BIDI

1000BASE-LH, SFP transceiver, Tx1550/Rx1310, BiDi LC, 40 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.


10GE

Model

Description

XG-SFP-SR-MM850

10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF

XG-SFP-LR-SM1310

10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF

XG-SFP-ER-SM1550

10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF

XG-SFP-ZR-SM1550

10GBASE-ZR, SFP+ transceiver, 1550nm, Duplex LC, 80 km over SMF

XG-SFP-AOC1M

10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers

XG-SFP-AOC3M

10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers

XG-SFP-AOC5M

10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

 

40GE

Model

Description

40G-QSFP-SR-MM850

40GBASE-SR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 150 m over OM4 MMF, 100 m over OM3 MMF

40G-QSFP-LSR-MM850

40GBASE-LSR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 400 m over OM4 MMF, 300 m over OM3 MMF

40G-QSFP-LR4-SM1310

40GBASE-LR4, QSFP+ transceiver, 1310 nm, Duplex LC, 10 km over SMF

40G-QSFP-iLR4-SM1310

40GBASE-iLR4, QSFP+ transceiver, 1310 nm, Duplex LC, 2 km over SMF

40G-QSFP-LX4-SM1310

40GBASE-LX4, QSFP+ transceiver, 1310 nm, Duplex LC, 150 m over OM3/OM4 MMF, 2 km over SMF

40G-AOC-5M

40GBASE, QSFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

40G-AOC-30M

40GBASE, QSFP+ active optical cable (AOC), 30 m, including one cable and two optical transceivers

 

100GE

Model

Description

100G-QSFP-SR-MM850

100GBASE-SR, QSFP28 transceiver, 850 nm, MPO 1 x 12, 100 m over OM4 MMF, 70 m over OM3 MMF

100G-QSFP-LR4-SM1310

100GBASE-LR4, QSFP28 transceiver, 1310 nm, Duplex LC, 10 km over SMF

100G-QSFP-iLR4-SM1310

100GBASE-iLR4, QSFP28 transceiver, 1310 nm, Duplex LC, 2 km over SMF

100G-AOC-5M

100GBASE, QSFP28 active optical cable (AOC), 5 m, including one cable and two optical transceivers

100G-AOC-10M

100GBASE, QSFP28 active optical cable (AOC), 10 m, including one cable and two optical transceivers

 

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contáctenos

Contáctenos

How can we help you?

Contáctenos

Get an Order help

Contáctenos

Get a tech support

2024 Ruijie Networks Brand Awareness Survey

Your opinions and feelings are crucial for our improvement.

Fill in the survey